Bi-objective thermal-management optimization of a fuel-cell electric bus with integrated metal-hydride storage and a reversible heat pump


Yağcı D., Turgut M. S., Genceli H., Turgut O. E.

International Journal of Hydrogen Energy, cilt.289, 2026 (SCI-Expanded, Scopus)

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 289
  • Basım Tarihi: 2026
  • Doi Numarası: 10.1016/j.ijhydene.2026.158382
  • Dergi Adı: International Journal of Hydrogen Energy
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Artic & Antarctic Regions, Chemical Abstracts Core, Chimica, Compendex, Environment Index, INSPEC, Academic Search Ultimate (EBSCO), Engineering Source (EBSCO)
  • Anahtar Kelimeler: Fuel-cell electric bus, Heat pump, Metal-hydride hydrogen storage, Multi-criteria decision-making, Multi-objective optimization, Thermal management
  • İstanbul Gelişim Üniversitesi Adresli: Evet

Özet

This paper optimizes the thermal management design of a 12.6-tonne metal-hydride fuel-cell electric bus. The integrated multi-component model of fuel cell waste-heat distribution between the Metal-Hydride bed and the cabin defined a two-objective optimization problem, with a Pareto front ranging from 5.93 to 6.72 kg (100 km)−1 in consumption and 72 to 403 bar2 s in supply-margin deficit. The surrogate-assisted optimizer found a median hypervolume 14% greater than the NSGA-II with an identical evaluation budget. The recommended compromise uses 12% more hydrogen than the economy-weighted compromise and cuts the supply-margin deficit by 38%. The winter cold-soak is the limiting case, because cabin conditioning is mostly driven by a heat pump with a coefficient of performance close to two. Below about 25 kW, 499 of the 500 sampled designs were infeasible. Larger capacities bring waste heat to the bed sooner. The Metal-Hydride supply margin is a transient warm-up problem, not a steady-state sizing problem. This work analyzes model-based comparisons of candidate designs. Decisive sub-zero transients are not validated; the delivery pressure does not limit the modeled stack; and auxiliary loads are excluded from the baseline and bounded in a separate check.