International journal of implant dentistry, vol.11, no.1, pp.11, 2025 (SCI-Expanded)
The aim of this study was to investigate in-vitro the temperature changes occurring in the bone during drilling with implant drills manufactured by different companies. Bone blocks obtained from fresh bovine ribs were used in the study. Bone blocks were drilled with drills manufactured by Ankylos, Astra Tech, Nobel Biocare, Bredent and Straumann implant brands at an ambient temperature of 30 ± 2° C under a constant pressure of 2 kg. Two K-type thermocouple sensors were placed on the bone blocks at 5th and 10th mm depths and the temperature changes were measured at a distance of 1 mm from the implant drill. In the study, working models were created under differ ent conditions for implant socket preparation. In group 1, the first time drills were used at 150 rpm without irrigation, in group 2, the first time drills were used at 1200 rpm with 40 ml/min irrigation, in group 3, the 30th time drills were used at 150 rpm without irrigation, and in group 4, the 30th time drills were used at 1200 rpm with 40 ml/min irriga tion. All osteotomy procedures were performed with 3.5 ± 0.3 mm diameter burs for a period of 8 s and the tempera ture values obtained at equal time intervals were recorded. Repeated Measures and Kruskall Wallis-H tests were used for statistical analysis of the data. No significant difference was observed between the implant drills and the tempera ture changes in the bone during drilling (p < 0.05). None of the groups reached critical temperature values (47° C+) throughout the study. At the 5th and 10th mm depths, the temperature changes in the sensors used were close to each other. It was also calculated that although the average temperatures were close to each other in the non irrigated and irrigated systems, the difference values obtained by subtracting the initial temperature were significantly higher in the non-irrigated systems. The results showed that implant drills did not cause significant temperature increases in bone blocks depending on the difference in manufacturers (Ankylos, Astra Tech, Nobel Biocare, Bredent, Straumann) and the number of uses. It was also concluded that irrigated and non-irrigated systems are safe as long as they are used under the recommended conditions. Keywords Implant, Dentistry, Temperature, Bone, Osteotom
Bu tez çalışmasında farklı implant firmaları tarafından üretilmiş implant frezleri ile yapılan
drilleme esnasında, kemikte meydana gelen sıcaklık değişimlerinin in-vitro olarak
incelenmesi amaçlanmıştır.Çalışmada blok halinde hazırlanmış taze dana kaburgası
kullanılmıştır. Ankylos, Astra Tech, Nobel Biocare, Bredent ve Starumann implant markaları
tarafından üretilen frezler ile hazırlanan kemik bloklarda 2 kg sabit basınç altında 30±2 C 0 ’lik
su banyosunda drilleme işlemi yapılmıştır. Kemik bloklara 5. Ve 10. mm derinliklere
yerleştirilmiş iki adet termocouple sensör ile implant soketine 1 mm mesafedeki sıcaklık
değişimleri ölçülmüştür. Kemik bloklar dört farklı çalışma grubuna ayrılmıştır. Grup1’de ilk
defa kullanılan frezlerle 150 rpm hızda irrigasyonsuz, , grup 2’de ilke defa kullanılan frezlerle
1200 rpm hızda 40 ml/dk irrigasyon ile, grup 3’de 30. Defa kullanılan frezlerle 150 rpm hızda
irrigasyonsuz, grup 4’de 30. Defa kullanılan frezlerle 1200 rpm hızda 40 ml/dk irrigasyon ile
çalışılmıştır. Yapılan tüm osteotomi işlemleri 3,5±0.3 mm çaplı frezler ile 8 sn süre
periyodunda gerçekleştirilmiş eşit zaman aralığında elde edilen değerler, termocouple
üzerinden bilgisayara aktarılmıştır. Kaydedilen verilerin istatistiksel analizinde One-way
ANOVA ve Krusakal Wallis-H testleri kullanılmıştır.
İmplant frezlerinin drilleme esnasında kemikte oluşturdukları sıcaklık değişiklikleri ile
frezlerin markaları arasında anlamlı bir ilişki gözlenmemiştir (p>0.05). Grupların hiçbirinde,
çalışma boyunca kritik sıcaklık değerlerine (47C 0 +) ulaşılmamıştır. 5. ve 10. mm derinliklerde
kullanılan sensörlerdeki sıcaklık değişimlerinin de birbirine yakın olduğu görülmüştür.
Ayrıca, irrigasyonsuz ve irrigasyonlu çalışılan sistemlerde ortalama sıcaklıkların birbirine
yakın olduğu; ancak başlangıç sıcaklığı çıkartılarak elde edilen sıcaklık farklarının
irrigasyonsuz sistemlerde anlamlı düzeyde olduğu hesaplanmıştır.
5
Çalışmanın sonuçları,implant frezlerinin önerilen koşullarda kullanıldığı sürece, üretici
firmaya bağlı olmaksızın önemli ölçüde sıcaklık artışlarına neden olmadığını göstermiştir.
Anahtar Kelimeler: İmplant, diş hekimliği, sıcaklık, kemik, osteotomi