Doç. Dr. ENGİN ERBAYRAK

Yayın Ağı

Makaleler 17

1. Exploring the strength analysis of a double lap bi-adhesive joint using hybrid composite adherend and six-node pentahedron cohesive elements under different loading rates

Erbayrak E.

Journal of Adhesion Science and Technology , cilt.39, sa.14, ss.2214-2235, 2025 (SCI-Expanded, Scopus)

2. Low-velocity impact analysis of metal-composite joints with grain-refined A356 and reinforced epoxy adhesive using six node pentahedron cohesive elements

Erbayrak E., Colak M., NOBERİ C.

Journal of Adhesion , 2025 (SCI-Expanded, Scopus)

3. Determination of the Natural Frequency Change of Different Bayburt Stone (Tüfit) Sizes During the Transportation in the Screw Conveyor

ERBAYRAK E., Dülgeroğlu F.

Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.16, 2023 (TRDizin)

4. Numerical investigation of the Mode I/Mode II fracture behavior of the hybrid composite joints with a hybrid bondline

Erbayrak E.

Journal of Engineering Research (Kuwait) , cilt.11, sa.4, ss.526-535, 2023 (SCI-Expanded, Scopus)

5. Experimental study of adhesively bonded joints with dissimilar composite laminates under different loading rates and ambient temperatures

Erbayrak E., EKER B., Yuncuoglu E. U.

Journal of the Brazilian Society of Mechanical Sciences and Engineering , cilt.45, sa.5, 2023 (SCI-Expanded, Scopus)

6. Investigations of low-velocity impact behaviour of single-lap joints having dissimilar hybrid composite adherends through cohesive zone model approach

Erbayrak E.

Journal of Adhesion Science and Technology , cilt.36, sa.5, ss.545-565, 2022 (SCI-Expanded, Scopus)

7. Determination of flexural properties of hybrid composite using Cowper-Symonds rate-dependent material model

Erbayrak E.

Journal of Composite Materials , cilt.55, sa.29, ss.4399-4420, 2021 (SCI-Expanded, Scopus)

8. An Experimental and Numerical Determination on Low-Velocity Impact Response of Hybrid Composite Laminate

Erbayrak E., Yuncuoglu E. U., Kahraman Y., EKER B.

Iranian Journal of Science and Technology - Transactions of Mechanical Engineering , cilt.45, sa.3, ss.665-681, 2021 (SCI-Expanded, Scopus)

9. A numerical investigation of the effect of fiber orientation on the natural frequency of hybrid composite laminate

ERBAYRAK E.

Avrupa Bilim ve Teknoloji Dergisi , cilt.28, ss.188-191, 2021 (TRDizin)

10. Sandviç Kompozit ve Metal Plakalar ile Oluşturulan Tek Bindirmeli Yapıştırma Bağlantılarının Mekanik Özelliklerinin Deneysel ve Nümerik Yaklaşım ile Belirlenmesi

ERBAYRAK E.

Mühendis ve Makina , cilt.62, sa.705, ss.665-680, 2021 (TRDizin)

11. Investigations of Strain Rate Effects on the Mechanical Properties of Hybrid Composite Laminate Under Varying Temperatures

Erbayrak E., EKER B., Yuncuoglu E. U., Kahraman Y.

Arabian Journal for Science and Engineering , cilt.45, sa.11, ss.9709-9724, 2020 (SCI-Expanded, Scopus)

12. Determination of the impact damage threshold point of composite material using fuzzy-base taguchi method

Erbayrak S., Erbayrak E.

Journal of Engineering Research (Kuwait) , cilt.8, sa.3, ss.153-171, 2020 (SCI-Expanded, Scopus)

13. Effect of loading rate on cohesive parameters of the adhesive Araldite 2015

Erbayrak E., Ozer H.

Materialpruefung/Materials Testing , cilt.62, sa.9, ss.943-949, 2020 (SCI-Expanded, Scopus)

14. Düşük Karbonlu Çelik Malzemenin Rijitlik Değerinin Deneysel ve Teorik Yaklaşım ile Belirlenmesi

ERBAYRAK E., ASMAZ K., SOLAK A.

Bayburt Üniversitesi Fen Bilimleri Dergisi , cilt.1, sa.1, ss.1-7, 2018 (TRDizin)

15. The effects of curing temperature on fracture energy and cohesive parameters for the adhesive Araldite 2015

ÖZER H., Erbayrak E.

Journal of Adhesion Science and Technology , cilt.32, sa.12, ss.1287-1312, 2018 (SCI-Expanded, Scopus)

16. EFFECT OF ADHESIVE TYPE ON FREE TRANSVERSE VIBRATION OF SINGLE LAP JOINT

ERBAYRAK E., ÖZER H., ERBAYRAK S., ÇEPER K., AĞIRKOL B., GÜNER E.

INTERNATIONAL JOURNAL OF ADVANCES ON AUTOMOTIVE AND TECHNOLOGY , cilt.2, ss.104-107, 2018 (Hakemli Dergi)

17. Pirinç MS58 ve Çelik ST37 Malzemelerinden Yapılmış Kirişlerin Deneysel Teorik ve Sonlu Elemanlar Yöntemi Kullanılarak Çökme Analizinin Yapılması

EREN İ., ERBAYRAK E.

Fırat Üniversitesi Mühendislik Bilimleri Dergisi , ss.51-56, 2016 (TRDizin)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 20

1. NUMERICAL DETERMINATION OF STRESS BEHAVIOR OF HYBRİD COMPOSITE SINGLE LAP JOINT UNDER DIFFERENT STATIC LOAD CONDITIONS

ERBAYRAK E.

16th International Istanbul Scientific Research Congress on Life, Engineering, Architecture, and Mathematical Sciences, İstanbul, Türkiye, 28 - 29 Şubat 2024, (Tam Metin Bildiri)

2. INVESTIGATION OF THE SHEAR STRESS BEHAVIOR OF COMPOSITE SINGLE LAP JOINT HAVING THE HYBRID BOND LINE

ERBAYRAK E.

6th International Azerbaijan Congress on Life, Engineering, Mathematical, and Applied Sciences, Türkiye, 20 - 22 Mart 2024, (Tam Metin Bildiri)

3. INVESTIGATION OF THE EFFECTS OF DIFFERENT BOUNDARY CONDITIONS AND MATERIAL USED ON THE CRITICAL BUCKLING LOAD AND NATURAL FREQUENCY VALUES OF THE EULER-TYPE PIPE.

Dülgeroğlu F., ERBAYRAK E.

7th International Conference of Mathematical Sciences (ICMS 2023), İstanbul, Türkiye, 05 Temmuz 2023, (Özet Bildiri)

Kitaplar 2

1. KÖPRÜLÜ KREN SISTEMLERININ DESTEK AYAKLARINDAKI BURKULMA DEFORMASYONUN SONLU ELEMANLAR YÖNTEMI ILE INCELENMESI

ERBAYRAK E.

Makine Mühendisliği Alanında Araştırmalar ve Değerlendirmeler, BARDAK SELAHATTİN, Editör, gece yayınevi, Ankara, ss.43-54, 2025

2. Experimental Investigation on the Self-Healing Efficiency of Araldite 2011 Adhesive Reinforced with Thermoplastic Microparticles

ÖZER H., ERBAYRAK E.

Adhesives Applications and Properties, Anna Rudawska, Editör, Croatia: INTECH., ss.169-185, 2016

Metrikler

Yayınlar & Eserler

Yayın

Yayın (WoS)

Yayın (Scopus)

Atıf (Scopus)

H-İndeks (Scopus)

Proje